Other Operating Instructions
Continued
Prewash cycle
Model LPR6244A
For best results, use warm water for
prewashing stained laundry. Hot water
can set stains.
1. Use recommended amount of pre-
soak product or detergent.
2. Push Cycle Control Knob in.
3. Turn clockwise to point to a number
next to PREWASH.
4. Pull the Cycle Control Knob out.
The washer will start.
5. When the cycle is over, add
detergent for the next selected
wash cycle. The Prewash cycle
should be followed by a wash cycle.
NOTE: See the Laundry Guide for
additional prewashing or soaking tips.
Manual clean lint filter
Clean the filter at the bottom of the
agitator after every load for the best
filtering results.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter is not removable.
3. Replace the agitator barrel and
snap it into place.
Manual
clean
lint filter
12