Filter
Top Products
Caring For Your Dryer
Product and Fabrk Damage Hazard
Do not run the dryer wfth the lint ween foose,
damaged, blocked or mlsslng. Doing so can
cause overheatlng and damage to both the
dryer and fabrks.
Cleaning the lint screen
The lint screen is located under a lid
on top of the dryer. Clean It before
each load. A screen bkked by lint
can increase drying time.
1. Cpen the lid and pull the lint screen
straight out.
2. Roll lint off the screen with your
fingers. Do not rinse or wash the
screen to remove lint. Wet lint is
hard to remove.
3. Push the lint screen firmly back into
place and cbse the ltd.
Lint screen maintenance
Laundry detergents and fabric
softeners can cause a residue build-up
on the lint screen. A clogged lint
screen can extend drying times. Clean
the lint screen every six months or
more frequently if it becomes clogged
due to a residue build-up. Use the
following method:
Wet both sides of lint screen with
hot water.
1.
2.
3.
4.
5.
Wet a nybn brush with hot water
and liquid detergent.
Scrub lint screen with the brush
until all residue build-up is re-
moved.
Rinse with hot water.
Thoroughly dry lint screen with a
clean towel and replace in dryer.
9