Filter
Top Products
Operating lnstructlona
Contlnued
Using DAMP DRY
Use this setting to dry damp items that
do not require an entire drying cycle,
or to dry items to damp level. (Two
examples are heavy cottons, such as
jeans, which you do not want to
become stiff, or cotton clothes which
are easier to press when damp.)
1. Set the Cycle Control Knob on
DAMP DRY in the REGULAR/
PERMANENT PRESS cycle.
2 Push the Start Button.
The dryer tumbles the toad with heat
for 20 minutes, then without heat for
10 minutes.
Additional Dryer Feature
End-of-cycle signal
The dryer sounds a signal to let you
know when the cycle is finished. The
signal cannot be turned off and is not
adjustable.
The signal is helpful when you are
drying permanent press, synthetics
and other items that should be taken
out as soon as the dryer stops.
6