Filter
Top Products
Operating Instructions
In This Section
Page
Starting your
washer .-.. . . ..-.._ - . . . ..--- 7
Page
Select a cycle and wash time .-.-.......... .-.A
I
Select a load al20 .-.. --... . . . . . . . . . . . .
What happens In each cycle I . . . . . -..--....A
Select a water temperature -.- . ..-..-. -..-.7
Your Whirlpool washer is designed for ease of operation and maximum washing efficiency. The
following will help you quickly learn to operate your machine.
Starting your washer
Add measured detergent. Then place a sorted
load in the washer before starting. See page 12
for additional “Before you wash” information.
Select a load size
l
Turn the knob to point at a setting that
describes the size of load you want to wash.
l
Set the knob on EX SMALL (a few small items),
SMALL, MEDIUM or LARGE (a full load).
NOTE: For best washing results, items should
move freely in the washer. Do not overload the
washer or choose a water level that is too low for
your wash load.
For best resufts with permanent press clothes,
use the LARGE water level.
Reduce wash time when using EX SMALL or
SMALL water level setting. Loads with only a few
small items need less wash time for best results.
Select a water temperature
l
Match the water temperature to the type of
fabric and soils being washed.
l
The top temperature is the wash selection and
the bottom temperature is the rinse selection.
NOTE: Use warm wash water with the
PERMANENT PRESS or DELICATE cycles.
For heavily soiled permanent press or knit
clothes, pre-wash or pre-soak before washing in
warm water.
ALWAYS use cold rinse water for permanent
press fabrics.
wrm
8lME
TEMPERATURE
7