Filter
Top Products
In This Section
Paw
Paw
Permanent lnotdlation
. . . . . . . . ..I..“.........-..“..“...
5
Portable two faucet
connection . . . . . . . . . ..-. ,...6
Portable one faucet connaction . ..“.....-I -......6
Permanent or portable installation is available for your washer. Instructions and kii numbers are detailed
in this section.
Permanent installation
This washer can be converted from portable to
permanent. Instructions for permanent installation
come with the washer.
You will need two fill hoses, one drain hose
and four leveling legs. These can be purchased
from your Whirlpool Dealer (Kit #3430190).
Portable one faucet connection
Use the hose connector provided with the washer
for a one faucet connection.
Set the Tempera-
ture Selector to COLD/COLD. (See
page 6 for a
portable two faucet connection.)
Water temperature
adjustment:
Water Temperature Selector must be set to
COLD/COLD to assure proper fills. Adjust water
temperature as follows:
l
Adjust faucets for wash water tempertaure prior
to the fill for wash.
l
Adjust faucets for rinse water temperature prior
to fill for rinse.
NOTE:
Always use cold rinse water for perma-
nent press fabrics.
To connect washer:
l
Lii the hoses off the storage rack on the back
of the washer.
l
Attach the hose connector to the faucet adapter
by pulling down on the lockfng collar while Ming
up on the connector until lt snaps into place.
l
Slowfy turn the water faucet on all the way.
l
Pull the electrical power cord from the storage
area in the back of the washer. Plug the power
cord into a 3-prong grounded outlet.
5