Filter
Top Products
To disconnect washer:
l
Unplug the electrical power cord and put it back
in its storage area.
l
Turn the water faucet off.
l
Press the red water flow button to release the
water pressure.
l
Move the locking collar down and pull the hose
connector down to disengage from the faucet
adapter.
l
Drain water from the hoses through the hose
connector.
l
Hang the hoses on the storage rack.
Locking
Water iow
‘Hose
button
connector
Portable two faucet connections
ff you have two separate water connections, your
washer can be connected to both the hot and
cold water faucets using Kit
#3430190.
This
kii can be purchased from your Whirlpool Dealer.
Connecting the washer:
l
Connect the hot and cold water inlet hoses to
the hot and cold faucets.
l
Secure the drain hose to the sink or standpipe.
l
Slowly turn the water faucets on all the way.
l
Plug the power cord into a 3-prong grounded
outlet.
To disconnect the washer:
l
Unplug power cord and return it to the storage
area.
l
Turn water faucets off.
l
Disconnect the drain and water supply hoses.
Hang them on the storage rack.