TIME DISPLAY
The TIME Display shows the total
amount of wash agitation time se-
lected. When the first fill begins, the
display changes to “AU:’ indicating
automatic operation.
l
Any time during wash agitation
the MORE TIME or LESS TIME pad
can be touched. The display
will show the number of minutes
left in wash agitation.
l
During the final spin the dis-
play changes to show the
number of minutes let? until the
cycle is finished and the load
can be removed.
Restarting the Washer
The washer is designed to “re-
member” where it was in the cycle
when HOLD/RESTART is touched. It
will not remember if there is a power
interruption, such as a blown fuse.
it power is lost at beginning
of wash cycle:
1. Touch POWER “ON:’
2. Touch FABRIC Selection and Options
The washer will finish filling (if needed),
and wash according to the new
selections.
If power is lost with water remaining
in the washer:
I. Touch POWER “ON:’
2. Touch SPIN to drain and spin the
load.
3. After the washer stops, touch POWER
“ON” again.
4. Touch FABRIC Selection and Options.
The washer will wash according to the
new selections.
if memory Is lost at beginning of rinse
cycle.
1. Touch POWER “ON:’
2. Touch RINSE SPIN to finish filling and/
or the rinsing cycle.
Changing the Amount of Wash Time
When a FABRIC Selection is touched,
the amount of wash agitation time will
appear in the TIME Display. The wash
agitation time which appears is the
recommended time for that cycle (for
normally soiled items). IF MORE TIME
or LESS TIME is desired, touch the ap-
propriate TIMED WASH pad before the
end of the first fill.
See pages 10 and 11 for minimum,
recommended and maximum wash
times.
7