Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load in the washer betore starting it.
POWER
WATER LEVEL PREWASH OPTIONS
FABRIC SELECTION
TEMP C
MH s”‘,; m HHH HmH w
I PREWASH
I YAW
1
. Touch POWER “ON!’
2
. Select a WATER LEVEL.
l
The washer will power up and the
Fabric Selection lights will scan. The
control is now ready for your
selection.
l
You have 15 minutes to make a se-
lection or the washer will automati-
cally shut off.
l
The washer will automatically fill
to the “HI” water level. If more or less
water is needed, touch the Water
Level pad. The blinking light shows
the actual water level. The non-
blinking light shows the selected
water level.
l
Select the setting that fits the size
of load you are washing.
See your “Laundry Guide” for load
size suggestions.
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
*Approximate
fill with load.
CAUTION: DO NOT
OVERLOAD WASHER.
(21.7 galsJ82.1 L)*
(19.2 galsJ72.7 L)’
(16.4 galsJ62.1 L)’
(14.1 galsJ53.4 L)’
(11.9 gals./450 L)’