Filter
Top Products
Restarting your
Washer
If you stop your washer by touch-
ing HOLD, you earl restart it by touching
RUN The washer remembers”and
starts from where I: stopped
However, if :/ou stop your washer
by movrng the swatch to POWER OFF,
every selection
IS
cancelea They are
also canceled rf a blown fuse or power
Interruption stops the washer
The way you restart the washer
depends on what the washer was doing
when it stopped
Filling for (or beginning of) the
wash cycle:
l
Move switch to POWER ON
l
Touch
FABRIC Selector
and options.
l
The washer will flnrsh fillrng
[If needed] and wash according to the
new selections
End of the wash cycle:
l
Move switch to POWER ON
l
Touch SPIN ONLY to drain and spin.
l
After the washer stops, again move
switch to POWER ON
l
Touch RINSE SPIN to fill. rinse, drain
and spin the load
Filling for (or beginning of) the rinse
cycle:
l
Move switch to POWER ON
l
Touch RINSE SPIN to frnrsh filling or to
finrsh the rrnsing cycle
Using Selections
Together
Your washer has Electronrc Con-
trols that let many selections work
together for the kind of wash you want.
There are many possible combr-
natrons of selections .so many that
there isn’t room to tell about each com-
brnatron possible
The Indicator lights will tell you
what you need to know. If the Indicator
lrght glows when you touch a selector,
the Electronic Controls accept the
selection. If it does not glow, the Elec-
tronic Controls reject the selection.
1
The indicator //ght WI// glow and stay
glowing. When this happens, your
selection has been accepted. The
washer will use that selectron or
option while it
IS
operating
2. The ind/cotor light w//i giow, but
another WI// go off This means that
your second selection cancelled the
first. For example, if you touched
REG/ HEAVY and decide you want
PERM’T PRESS, lust touch PERM’T
PRESS. The REG /HEAVY Selection IS
cancelled and Its indicator light
goes off
3
The indicator hght w//i not glow, The
Electronrc Controls are designed
to reject any option that shouldn’t be
used for the wash you selected. For
example, if you touched KNITSi
GENTLE, you won’t be able to get the
HOT WASH indicator light to glow.
Pages 8 through 13 of this Use
& Care Guide tell what happens during
each selection. For each selectron,
there are details on which can and
can’t be used together.