Filter
Top Products
Starting your washer
Before starting
your washer:
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start the washer.
Select WATER
2.
TEMPERATURES
l Turn the knob to point at a setting
that describes the size of load you
want to wash.
l Set the knob on or between EX
SMALL [a few items] and EX LARGE
(a full load).
l To change the water level after the
washer has started to fill, turn the knob
to RESET, then the desired water level.
l Select wash and rinse water tem-
peratures by pushing a button.
l This drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your “Laundry Guide:’
LOAD SIZES AND WATER LEVELS
for best cleaning results, the
load must be able to move freely
0
CAUTION:
in the water. Too big a load or too
DO NOT
little water can cause wear or
OVERLOAD WASHER.
tearing of load items.
(17.3 gal./655 L)’
*Approximate
(14.7 gal./557 L)’
fill with load.
(12.1 galI45.8 L)*
U(SMALL
(9.5 gaU36.0 L)’
4