Filter
Top Products
If you need service or assistance,
u follow these five
steps:
1.
Before calling for
assistance...
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
If your washer does not fl!!:
l Is the power supply cord plugged
into a live circuit with the proper
voltage?
veil.
l Have you checked your home’s
main fuses or circuit breaker box?
l Are the water supply hoses kinked?
l Is the Cycle Control Knob set and
pulled out?
If your washer does not spin:
l Is the lid closed?
l Is the power supply cord plugged
into a live circuit with the proper
voltage?
l Have you checked you home’s
main fuses or circuit breaker box?
If your washer stops durlng a cycle:
l Remember, the washer pauses
briefly at different times in each
cycle. These pauses are normal.
If your washer fills and drains
wlfhouf runnlng:
l Make sure that the Cycle Control
Knob is pointing to a number in the
cycle.
Make sure fhe drain hose Is hlgher
than fhe wafer level In the washer.
If lf Isn?:
l The washer may seem to be drain-
ing during wash and rinse cycles.
l Water can siphon out. (See “lnstalla-
tion Instructions!‘)
l Are both water faucets open?