Whirlpool Gas Dryers Clothes Dryer User Manual


 
Selecting a cycle-time-temperature
The information you need to make correct
drying decisions is given in this section.
l Pages 7 and 8: Use these pages to find
additional information about drying cycles that
may be on your model.
l Pages 9 to 11: Find the page that has a
control panel similar to yours. Use this page to
guide you when making drying selections.
Your dryer has a Cycle Control Knob with
temperatures built-in:
1. Select a cycle, time, and temperature by
turning the Cycle Control Knob either way.
2. Stop when the indicator on the knob’s outer
ring points to the cycle, time, and tempera-
ture you want.
Changlng a selection:
1. Turn the Cycle Control Knob to point to a
new setting.
2. Push the Start Button, if necessary.
Using the Damp Dry cycle
(on some models)
Use this cycle to dry damp items that do not
require an entire drying cycle, or to dry items to
damp level. Two examples are heavy cottons,
such as jeans, which you do not want to be-
come stiff, or cotton clothes which are easier to
press when damp.
1. Set Cycle Control Knob on DAMP DRY.
2. Push the Start Button.
The dryer tumbles the load with heat, then
without heat for the last few minutes.
Using the Wrinkle Free cycle
(on some models)
The Wrinkle Free cycle removes wrinkles from
clothing that has been packed in a suitcase or
closet, and from items not removed from the
dryer at the end of a cycle.
1. Set Cycle Control Knob on WRINKLE FREE.
2. Push the Start Button.
The dryer tumbles the load with heat, then
without heat for the last few minutes. For best
results, put only a few items at a time in this
cycle. As soon as the dryer stops, put the items
on hangers or fold them.
Shaded areas show location of wrinkle free cycle
7