Filter
Top Products
Operating Your Dryer
In This Section
Page
Page
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting a cycle-time+temperature . . . . . . . . . . . . . . . 7
. . . . . . . . . . . . . . . . . . . . . . . 6
Operating your dryer properly assures the best drying results. This section gives you important
information to help you to select a cycle, time and temperature.
Before starting your dryer
Refer to the information below, and “Laundry If your dryer has a Consumer Buy Guide,
Tips” for control setting, sorting and loading
remove it and place it with your Use and Care
information. Guide.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle, time, and
temperature (if necessary). See pages 7-11 for
additional setting information. Your dryer
automatically stops when a cycle ends.
i;;E;ing and restarting your
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door; make new selec-
tions (if necessary). Push the Start Button,
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished, turn
the Cycle Control Knob to an OFF area.
End of cycle signal
(on some models)
The dryer sounds a signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable (unless you have an
End of Cycle Signal selector).
The signal is helpful when you are drying
permanent press, synthetics and other items that
should be taken out as soon as the dryer stops.
It your model has an End
of
Cycle
Signal
selector:
l Turn the End of Cycle Signal selector to ON if
you desire a signal to let you know when the
cycle is finished.
l Turn the End of Cycle Signal selector to OFF if
you do not desire a signal when the cycle is
finished.
6