Whirlpool Front-Loading Automatic Washer Washer User Manual


 
5
LCD CONTROLS
Use these buttons to select options displayed in the LCD
screen, and to navigate through options.
BACK
Press the BACK button to go back to the previous screen
without accepting any changes made on the current
screen. Press and hold for 1 second to return to the
start-up screen for the selected cycle.
MORE INFO
Press to get more information on a setting or option.
Press MORE INFO again to return to the previous screen.
t
and
u
BUTTONS
t
Button
Press the
t
button when the arrow is lit to go back to the
previous set of options or settings.
u
Button
Many screens have more than 4 selections. Press the
u
button when the arrow is lit to show additional options
or settings.
SELECTION BUTTONS
Use the four selection buttons to choose options or
settings displayed on the LCD screen.
ECOBOOST™ option
Press to activate the EcoBoost
option. The EcoBoost
option provides additional energy savings through reduced
hot water usage and maintains cleaning performance by
lengthening the wash time on some cycles.
NOTE: Press and hold the EcoBoost
option button
for 3 seconds to turn the drum light on or off.
WASH CYCLE KNOB
Use your Wash Cycle Knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
FANFRESH
®
option
With the washer on, press to activate the FanFresh
®
option.
This will periodically tumble the load after the end of the cycle
for up to 16 hours while the integrated fan circulates air through
the washer to reduce humidity.
When to use FanFresh
®
option:
n When you can’t remove the load from the washer right
away to help avoid musty odor buildup.
n Combined with the Quick Wash cycle, you can wash
and dry a small load of many common lightweight items
overnight to save time and energy.
NOTES:
n
The door will lock while the FanFresh
®
option is active.
Press the POWER button to stop the cycle and unlock
the door.
n
FanFresh
®
option is not available if the spin speed is set
to No Spin.
or
SMART GRID BUTTON
Press to activate the Smart Grid option (see “Smart
Feature Sheet”).
6
7
8
9
10
Precision Dispense Ultra Cartridge
Each dispenser cartridge holds up to 18.5 oz.
(550 ml) of liquid HE detergent, enough for up to
36
loads, depending on cycle and detergent
concentration. The cartridge ts into compartment
B of the dispenser drawer for convenient loading.
n
Change detergent concentration setting
if detergent used is different than factory
preset of 2x concentration.
n
Change water hardness setting if desired
level is different than factory preset of Normal.
Powdered High Efciency “HE” detergent
compartment
This compartment holds powdered HE detergent
for a single load.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric
softener at the optimum time in the cycle.
n
Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine
bleach at the optimum time during the rst rinse
after the wash cycle. This compartment cannot dilute
powdered bleach.
B
D
A
PRECISION DISPENSE ULTRA DRAWER
The Precision Dispense Ultra drawer gives you the
convenience of automatically adding HE detergent, liquid
chlorine bleach, and fabric softener to the wash load at the
proper time. See “Using the Dispenser” for information on
using the dispenser drawer.
C
Choosing the Right Detergent
Use only High Efciency detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failure and,
over time, buildup of mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
Use only High Efciency (HE) detergent.
The number of loads will vary, depending on detergent concentration,
load size, cycle used, and soil level. The maximum capacity of up to
36 loads requires use of 6x concentration detergent.