Filter
Top Products
11
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temperature, Soil Level, and Spin Speed, and to add
options such as an additional Rinse. Use the
t
and
u
arrow
keys to page to additional options. For more information on a
cycle, press MORE INFO.
NOTE: Not all settings are available on all cycles. See “Cycle
Guide” for available settings.
9. Adjust settings (if desired)
10. Select any additional options
Press the FanFresh
®
, Smart Grid, or EcoBoost™ button
to add these options to the selected cycle.
If the FanFresh
®
option is selected, the washer will
automatically activate the vent fan and tumble the load
periodically for up to 16 hours. This is useful if you are
unable to remove a load immediately after the cycle has
nished.
The EcoBoost
™
option provides additional energy savings
through reduced hot water usage and maintains cleaning
performance by lengthening the wash time on some cycles.
NOTE:
n Not all options and settings are available with all cycles,
and not all features and cycles are available on all models.
n On model WFL98 only, see the “Smart Feature Sheet”
for information about setting up Smart functionality, turning
it on and off, receiving important notications, and taking
advantage of available features.
59min
Estimated
Cycle Time
OK
Normal/Casual
Use the arrows to increase or decrease the delay start time
O
20 hours
Delay Start: 6 hours
59min
Estimated
Cycle Time
11. Setting a delayed start
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 20 hours.
To set a delayed start:
1. Select the Delay Start option using the LCD control buttons.
Use the buttons to adjust the delay time up or down.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
IMPORTANT: If you are using the Delay Wash option, use of the
dispenser cartridge is recommended, or powdered detergent
may be used in the HE powdered detergent compartment.
(options vary by model)
Remote Start allows you to start your washer remotely using
the Smartappliances app. Make this selection last using the
System Settings button and the LCD control button. Make sure
that your washer remains closed and the cycle is not adjusted
until you start the cycle.
1. Select the desired cycle and features.
2. Press the System Settings button.
3. Press the LCD control button for Remote Start.
4. Press the LCD control button for the desired setting.
5. Make sure the washer remains on. If the washer is turned
off, the Remote Start feature will turn off.
Remote Start (model WFL98 only)
Remote Start
Remote
Start