Filter
Top Products
6. Select a wash-rinse temperature with
the Temperature Selector. Match the
water temperature wlth the type of
fabric and soils being washed.
l
For water temperature guidelines see
page 16.
on both models
7. Turn Cycle Selector Knob to the
desired setting. See page 9.
8. Push the Start/Pause button to start
washer.
l
The Cycle Selector Knob will NOT
rotate as the cycle progresses.
l
The Cycle Status Lights indicate the
operation being performed within the
cycle.
l
When the cycle is complete, all Cycle
Status Lights will be OFF.
NOTE: Once a cycle has been started, the
Cycle Selector Knob MUST be turned to
OFF before a new cycle can be selected.
m
Stopping/restarting your washer
l
To pause the washer at any time, push the
l
To cancel cycle, turn Cycle Selector Knob
Start/Pause button. The Cycle Status Lights
to OFF. Cycle Status Lights will turn off.
will flash while the washer cycle is paused.
If left in pause, the cycle will terminate after
NOTE: When lid is opened during a cycle,
2 hours.
all machine operation will stop. Cycle will
resume when lid is closed.
l
To restart the washer, close the lid (if
necessary) and push the Start/Pause
button.
8