Filter
Top Products
Using Spin Only
The Spin Only cycle helps shorten drying
times for some heavy fabrics or specialcare
items by removing excess water.
1. Turn the Cycle Selector Knob to Spin
Only, as illustrated.
2. Push the Start/Pause button. The washer
drains for 4 minutes and then proceeds to
spin. .
Manual clean lint filter
Clean filter after every load.
1.
To remove, grasp the top of the agitator
with both hands. Pull upward to remove
agitator cap. Lint filter is attached to the
end of the shaft.
2.
Detach lint filter by pinching forked ends
of shaft together. Slide lint filter off shaft.
3. Wash or wipe the lint filter clean.
4. Slide filter back into place on shaft (open
end up). Snap into place.
5. Push lint filter and agitator cap firmly back
into agitator.
Lint filter
10