Filter
Top Products
Printed in U.S.A.
Part No. 8535845
© 2002 Whirlpool Corporation
Benton Harbor, Michigan 49022, U.S.A.
Moving dryer to a new
location?
Check with your gas supplier or dealer
to confirm that your dryer is equipped
with the correct burner for the
particular type of gas in your new
home. Burner information is specified
on the model/serial rating plate.
Shut off electrical supply
to dryer. Unplug power
supply cord and tape it
securely to dryer.
Disconnect bracket from wall and
reinstall in new home. (Not used
on all models.)
Tape lint collector lid to
cabinet.
Tape top to cabinet.
Shut off gas supply valve in the
gas supply line. Disconnect gas
fittings from dryer and cap gas
supply line.Tape end of dryer
gas pipe.
Tape door to
front panel.
Turn leveling legs
all the way in.
Slide dryer onto cardboard or
hardboard before moving it across
the floor to prevent damaging floor
covering.