Filter
Top Products
4
COMPONENT ACCESS
CONSOLE COMPONENTS
1. Disconnect the power supply to the dryer.
2. Use a putty knife and push in on the spring clips at each corner of the console,
as shown.
3. Lift the console front up and rotate it back.
All components in the console are now accessible for service.
Electrostatic Discharge (ESD) Sensitive Electronics
Do not open the package containing the Electronic Printed Circuit Board
until it is time to install it.
ESD may damage or weaken the electronic board.
• Use an antistatic wrist strap. Connect the wrist strap to a green
ground connection point or unpainted metal on the appliance.
OR
• Touch your finger repeatedly to a green ground connection point
or unpainted metal on the appliance.
• Avoid touching electronic parts or terminal contacts; handle the
electronic board by the edges only.
IMPORTANT SERVICING POINTS
Putty Knife