Filter
Top Products
3
DEFAULT CYCLE SETTINGS
Automatic Cycles
Timed Cycles
CYCLE
1, 2
EXHAUST TEMP
3
AUTO DRY TIME/
(LED TEMP) TRIP / RESET DRYNESS DEFAULT
Heavy Duty
(High)
Auto Dry Level — factory default is
Towels / Cotton Normal Dry, retain the last used setting
(High) on a per-cycle basis
Normal
Wrinkle Shield — factory default is
(Medium Dry) On for the Casual cycle, and Off for all
Bulky Items other cycles, retain the last used setting
(Medium) on a per-cycle basis
Casual
Cycle Signal — factory default is
(Low) Softer, retain the last used setting per
Delicate run.
(Extra Low)
Notes:
3) The default temperatures are for reference only. The actual temperature is adaptive and variable and may not fall
within the ranges listed.
OPTIONS / MODIFIERS
1) Temperature is not user-adjustable in automatic cycles.
2) Some automatic cycles may start at a higher temperature and then adjust to the displayed temperature later in the cycle.
155˚F / 145˚F 39 minutes, Normal Dry
155˚F / 145˚F 45 minutes, Normal Dry
150˚F / 138˚F
115˚F / 105˚F 22 minutes, Normal Dry
34 minutes, Normal Dry
140˚F / 128˚F 60 minutes, Normal Dry
125˚F / 115˚F 36 minutes, Normal Dry
CYCLE TIME TEMPERATURE OPTIONS / MODIFIERS
Timed Dry 45 minutes factory default Medium factory default, user
Auto Dryness Level — only available
user selectable, retain last selectable, retain last setting in automatic cycles
setting per run per run
Wrinkle Shield — factory default Off,
Rack Dry 60 minutes default, user Air default, user selectable, retain last used setting on a per-cycle
selectable, not retained not retained basis, not available in Rack Dry cycle
Touch Up 20 minutes default, user Medium High default, user
Cycle Signal — factory default is Softer,
selectable, not retained selectable, not retained retain last used setting per run
user input results in three (3) beeps.
WRINKLE SHIELD - Selectable in all cycles except Rack Dry. A valid user input results in one (1) BEEP. An invalid
Notes:
TIMED CYCLES - Default times and temperatures are selectable.