Filter
Top Products
When moving the dryer...
l
Disconnect the electrical cord and
grounding wire and tape securely to
dryer
l
Shut off the gas supply valve controls
in the gas supply line.
l
Disconnect gas pipe and fittings from
dryer and cap the gas supply line.
l
Tape the drum to the front panel.
Tape the dryer door, lint screen lid
and end of gas pipe.
l
Screw leveling legs all the way in.
Before installing your dryer in your new
home, check with your gas supplier or
dealer to see that your dryer is
equipped with the correct burner for
the particular type of gas in your new
home. Burner information may be
found on the rating plate in the door
well of the dryer
Part No. 696322
Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022
If
you move...To make sure that your
appliance is correctly installed
and to insure its continued satisfactory
operation, call your dealer
(Installation cost will, of course, be
paid by you.)
Helpful hints...You
can help your
service representative give you faster
service if you include the model and
serial number of your appliance when
requesting service. Also, retain your
sales slip and warranty to verify your
warranty status.
Remember...Your
service
representative is trained in the
repairing and servicing of your
WHIRLPOOL appliances. He can help
you maintain the quality originally
built into your WHIRLPOOL appliance.
If you have a problem*:
Call your dealer or write:
Service Manager,
International Division
Whirlpool Corporation
Administrative Center
2000
U.S. 33 North
Benton Harbor, Michigan 49022
*If you must write, please provide: your
name, address, telephone number, type of
appliance, brand, model, serial number,
date of purchase, the dealer’s name, and a
complete description of the problem. This
information is needed in order to better
respond to your request for assistance.
0% CORPORATION
Printed in U.S.A.