Filter
Top Products
If dryers do not
operate properly...
Check the followlng to be sure that:
1. Electrical supply is connected.
2. Circuit breakers are not tripped or
fuses blown.
3. Doors are closed.
4. Timer has been actuated.
5. Controls are set in a running or
“ON” position,
6. Gas shutoff valves are open both
on dryer and supply Ilne.
Move dryers to a
new location...
Before movlng dryers across tloor,
slide dryers onto cardboard or
hardboard to protect tloor coverlng.
l
Shut off electrical supply to dryers.
l
Disconnect power supply cords and
tape securely to dryer.
l
Shut off the gas supply valves in the
gas supply line.
l
Disconnect gas pipe and fittings
from dryer and cap the gas supply
line. Tape end of dryer gas pipes.
l
Tape the drums to the front panel.
l
Tape doors to cabinet.
l
Adjust leveling legs all the way in.
Before installing dryers in a new
location, check with your gas supplier
or dealer to see that your dryer is
equipped with the correct burner for
the particular type of gas in your new
building. Burner informatlon may be
found on the model/serial rating
plate in the door well of the dryer.
Page 11