Tricity Bendix WDR 1041 Washer/Dryer User Manual


 
7
Attention! Before selecting the 21 (drain) or the 22
(spin) programmes, the selector dial must to be turned to
the “O” Off position.
Important!
The rinse hold option cannot be selected for
the automatic WASHING & DRYING programme.
4
“quick wash” button
Select this option for laundry that is only slightly soiled
(not available for C
OTTONS economy 60° - programme
2, M
INI 30° - programme 23 and WOOL - programmes
15, 16 and 17).
The washing time will be reduced according to the type
of fabric and the selected temperature.
5
“half load” button
Select this option to reduce water consumption on the
rinse cycle when washing ONLY a smaller load of
cottons or linens (maximum load size = 2.5 kg).
The machine performs the rinses with less water.
Note
It is possible to select this option when selecting the
automatic Washing & Drying cycle (maximum load
size = 2.5 kg).
6
“option” button
Press this button to select the following options:
prewash: select this option if you wish your laundry
to be prewashed at 30° C before the main wash (
not
available for
WOOL - programmes 15, 16 and 17 and
MINI 30° - programme 23).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics, whereas
in the programme for delicate fabrics the water is only
drained.
intensive: this option can be selected for heavily
soiled laundry.
If you depress this button the washing intensity will
be increased and the washing time will be prolonged
by few minutes depending on the selected type of
fabric.
This option can be selected with all cottons and
synthetic programmes but cannot be selected with
the Energy saving programme C
OTTONS economy
60° - programme 2.
extra rinse: this option can be selected with all
programmes, except the W
OOL - programmes 15, 16
and 17
and
MINI 30° - programme 23. The machine
will add 2 rinses to the programmes for cotton and 1
rinse to the programmes for synthetics.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
The prewash, the intensive and the extra rinse options
cannot be selected together by means of the relevant
button.
7
display
The following pieces of information are shown on the
display:
Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the “start pause” button), the displayed time
value decreases by one unit every minute.
Selected drying time in minutes or hours and
minutes (max 130 mins).
After the programme has started the time remaining is
updated every minute.
The washing machine has stopped with water in
the tub, at the end of a programme with
“rinse hold” option or at the end of the SOAK 30° -
programme 18: this is indicated by a flashing zero.
1.25
2.05