Filter
Top Products
10
Operating Sequence
WASHING
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 95°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment of the dispenser drawer and start the
machine.
1.Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2.Measure out the detergent
Pull out the dispenser drawer until it stops. Measure out
the amount of detergent required and pour it into the
main wash compartment .
If you wish to carry out the prewash or the soak
programme, pour detergent into the appropriate
compartment marked .
3.Measure out the fabric
softener
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
C0065
C0064
P0004
4.Switch the machine on and
select the desired programme
Turn the selector dial to the desired programme to
switch the appliance on. The display will show the
duration of the selected programme. The start pause
button light will start flashing.
To switch the appliance off turn it to “O” Off position.
5. Select the spin speed or the
“rinse hold” option
Press the “spin” button repeatedly, in order to select the
desired spin speed or the rinse hold option.
The relevant light will light up.
If you select the rinse hold option, the machine
will stop at the end of the programme with the water
still in the tub.
6. Select the desired options
Depress the relevant buttons to select the required
options. The corresponding light illuminates.
extra rinse
half
load
option
prewash
intensive
quick
wash
spin
1000
900
700
500
2.05
PROGRAMME
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23