Filter
Top Products
INSTALLING YOUR WASHER
-
DRYER
IMPORTANT
In the accessories bag you will also find a spanner
that is to be used for removing brackets and leveling
washer
-
dryer
feet.
REMOVING SHIPPING BRACKETS
MODELS:
WDB1043M
-
LWD1054M
-
WDC1025
WDC1025M
1.
Remove back panel screws and lift panel clear
(Fig. 1).
2.
Remove fixing screws from the four brackets and
cross bearing (Fig. 2) then remove brackets.
3.
Fix back panel with 3
screws previously removed
(Fig. 3).
4.
Close the 4 holes on the cabinet with the plastic
blanking plugs that you will find in the
accessories bag (Fig. 3)
MODELS:
WDS1043M
-
SWD1054M
-
WDC1024
-
W
DC1024M
1.
Remove fixing screws and respective spacers
from the two brackets to cross bearing (Fig. 4)
and remove brackets
2.
Close t
he 7 holes on the cabinet with the plastic
blanking plugs that you will find in the
accessories bag (Fig. 5).
LEVELING
After selecting a permanent location, the machine
should be properly leveled to prevent vibration.
To do this, adjust
one or both front levelers, as
needed, after loosening the lock nuts. Once your
washer is perfectly leveled, be sure to tighten
the
lock nuts (Fig. 6).
Page 2