Smeg WLB500T Washer User Manual


 
Instructions for Use
66
Trouble Shooting Guide
The user can come across troubles appearing
during the operation of the appliance. We are
listing some of troubles, which in most cases
result from improper handling of the appliance
and can be eliminated by yourself.
Problem: Check the following:
The machine doesn't operate (the control lamp
is off).
Check the power supply and fuses.
Is the plug correctly plugged in the socket?
Water is not pumped into the machine.
Is the machine switched on?
Is the water tap open?
Is the wire-net filter on the inlet hose clean?
Is the door well closed?
The machine jumps during operation.
Are the transport brackets removed?
Is the machine correctly levelled? (if not, use
the adjustable legs)
Check the load (perhaps you are washing
only one large item).
The machine is leaking.
Is the lint filter properly fixed?
Is the inlet hose properly secured to the tap
and to the machine?
The laundry is too wet.
Is the lint filter clean (free of solid particles)?
Check whether the wall siphon drain is
clogged (clean it).
Too much bubbling during washing.
Check the water hardness and/reduc the
quantity of washing powder you are using.
Washing was not efficient (stains, greasy clots).
Have you chosen the correct wash
programme? Use larger quantities of
washing powder for heavily soiled laundry, or
wash smaller loads.
Laundry is not well rinsed (wash powder
residues).
Is the lint filter clean (free of solid particles)?
Perhaps you overloaded the machine
(especially delicate fabrics) and used too
much washing powder.
Check whether the wall siphon drain is
clogged (clean it).
After you have considered all the above stated
instructions and the malfunction still cannot be
eliminated, call the nearest authorised service.
Any claim or malfunction caused by improper
installation or misuse is not covered by the
guarantee. All repair costs shall be covered by
the user.
WE RESERVE THE RIGHT TO ALTER THE
SPECIFICATIONS WITH NO INFLUENCE ON THE
OPERATION OF THE APPLIANCE.
THIS INSTRUCTION MANUAL CAN NOT BE A
REASON FOR CLAIM.