Smeg WLB500T Washer User Manual


 
Instructions for Use
62
Prepare your machine for
washing
Select laundry and load a suitable amount.
Close the door (push it towards the machine).
Fill the dispenser (in the correct sections).
Check water inlet and outlet.
Choose the right programme.
If your machine is equipped with switches, use
them, as appropriate.
Select the washing temperature, if your washing
machine is equipped with this option.
Switch the machine on.
After Washing
Switch off the machine (the control lamp turns
off).
Check that the washing is finished and that water
is pumped out of the machine to avoid
unnecessary flooding. If there is still water in the
machine, select one of the programmes for
pumping or spinning.
Some two minutes after the washing is finished
you can open the door.
Take the laundry out of the machine and turn the
drum once or twice with hand to make sure it is
really empty.
Check the rubber gasket on the door and
remove objects that might have deposited
(buttons, pins..) (fig. 14).
Leave the door open and allow the interior to dry.
Disengage any pushbuttons you used.
Close the water tap.
Check the dispenser and clean it if necessary
and dry it well.
Every now and then, check and clean the lint
filter.
14