Smeg 185426 Washer/Dryer User Manual


 
185426
Partial Aqua-stop (water stop system)
Incaseofdamageontheinteriorpipe,leakingis
preventedbyautomaticclosingsystemwhichstops
waterinlettothemachine.InsuchcasesdisplayA
turns red.
Inletpipemustbereplaced.
Complete Aqua-stop
Incaseofdamageontheinteriorpipe,leakingis
preventedbyautomaticclosingsystemwhichstops
waterinlettothemachine.
Securitysystemalsodetectswhetherthereisany
waterleakagewithintheinteriorofthemachine.
In such cases washing is suspended, machine
switchesonthepumpandsignalserror.
Do not immerse the Aqua-stop system inlet
pipe into the water, because it contains the
electric valve!
Fixtheoutlethosetorunintothesinkorthe
bathtub,orconnectitdirectlytothewalldrain
outlet(diametermin.4cm).
Walldrainmustbeinstalledproperlyandmust
enableoccasionalcleaning.
Fastentheoutlethosesupportwithapieceof
ropeledthroughthehoseelbow,topreventthe
hosefromslippingtotheoor.
Theendofoutlethoseshouldbeplacedbetween
minimum 60 cm and maximum 100 cm above the
oorlevel.
Plugthemainspowercabletothewallmains
socket.
Requiredvoltageandotherinformationarewritten
ontheratingplateabovethedooropeningofthe
machine.
8
Water outlet connection
Connect the appliance
to the mains supply