Smeg 185426 Washer/Dryer User Manual


 
185426
Puttheapplianceinhorizontalpositionbyturning
theadjustablelegs.
The
legsareadjustableupto+/-1cm.
After the adjustment tighten the nuts rmly (A)
- towards the bottom of the machine!
Vibrations, moving of the appliance and
loud operation due to incorrect setting of
the adjustable feet shall not be covered by
this warranty.
The appliance should be placed on a
surface with concrete base; the surface
should be dry and clean in order to prevent
slipping. The adjustable feet should also
be cleaned before installation.
Ifyouhaveatumbledryerofthesame
dimensions,youcanplaceitontopofthe
washing machine.
To ensure correct operation of the appliance,
water pressure inlet must be between 0,05
and 0,8 MPa.
Minimum water pressure can be established
by measuring the quantity of poured out
water. 3 litres of water must be poured out
from completely opened tap in 15 seconds.
Insertthegasketwithscreenintothewaterinlet
hose thread Screw the hose thread to the water
faucet
Incaseofhotandcoldwaterconnection,connect
onehosetocoldandothertohotwaterfaucetas
markedattherearoftheappliance(lettersCand
H)(C-cold;H-hot)
7
Water inlet connection
Leveling the appliance