Smeg 185426 Washer/Dryer User Manual


  Open as PDF
of 36
 
185426
In removing the wrapping be careful not to
damage the appliance with a sharp object.
Before connecting the appliance, let it
warm up to room temperature (wait for two
hours).
•
Ourappliancesarepackedinenvironmentally
friendlymaterialswhichmayberecycled,
depositedordecomposedwithoutanythreatto
the environment.
•
Tothisendallwrappingsaremarkedaccordingly.
•
Move the pipes.
•
LoosenscrewsAattherearofthemachine
(Fig. 1).
•
RemovethebracketsB(Fig.1)andslidethem
intothegrooveontheblockingrod(Fig.2)-the
rightoneshouldbeturnedaround.
•
Usethebracketstorotateblockingrodsfor90°
andpullthemout.
•
Closetheopeningswithattachedplasticpegs.
Savetransportbracketsforeventuallateruse.Save
thetransportbracketsforeventuallateruse.
Be sure to remove the transport brackets
prior rst use, otherwise the appliance
may be permanently damaged. In such
cases the warranty conditions are void.
Fig. 1
Fig. 2
Fig. 2
6
Installation and connection
Package removal
Removal of transport
brackets
 previous next