Filter
Top Products
The amount of detergent you will put in your machine will depend on
the following criteria:
Your detergent requirement will be based on the degree of
contamination of your laundries. Do not prewash your less stained
laundries and put your slight amount of detergent in the 2
nd
compartment of the detergent drawer.
For your much stained laundries, select a programme including
prewashing, and put ¼ of the detergent you will put in the
detergent drawer in the 1
st
compartment of the detergent drawer
while putting the remaining ¾ of it into 2
nd
compartment.
Use detergents produced for front loading machines. The amount
of detergent you will use for your laundries is printed on the
detergent package.
The higher the degree of hardness of the water the more detergent
you will use.
The amount of the detergent you will use will increase as the
amount of your laundries increase.
Put the softener in the softener compartment in the detergent
drawer. Do not exceed the MAX level. Otherwise, softener will flow
into washing water through flushing and stain your laundry.
Softeners with high density are required to be thinned to a degree
before being put in the drawer. Because high-density softener will
clog the flush and avoid the flow of the softener.
You can use your liquid detergents in all programs without
prewashing. For this, fit liquid detergent level plate in the
accessories bag into 2
nd
compartment of the detergent drawer and
set the amount of liquid detergent according to the levels on this
plate. Remember to detach the liquid detergent plate.
14
CHAPTER
-
4: PRELIMINARY PREPARATION FOR WASHING