Filter
Top Products
34
Cleaning the detergent drawer and drawer recess
1. Press the release lever (A) on the inside of the detergent drawer
and pull the detergent drawer out.
2. Remove the release lever (A) and the liquid detergent guide
(optional) from the detergent drawer.
A
3. Wash all parts under running water.
4. Clean the detergent drawer recess with an old toothbrush.
5. Replace the softener compartment and the liquid detergent guide
(optional) by pushing them firmly into the detergent drawer.
6. Push the detergent drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle without
any laundry in the drum.
Cleaning the mesh filter
You should clean the mesh filter at least once a year, or when the "4E" error message is displayed.
1. Turn off the water supply to the washing machine.
2. Disconnect the L-shaped arm fitting for the water supply hose
from the water supply intake at the back of the machine by
turning (A). To prevent water from running out due to the air
pressure in the water supply hose, cover the hose connection with
a cloth.
3. Gently pull out the mesh filters from the water supply intakes
using a pair of pliers and rinse them under running water until
they are clean.
4. Reinsert the mesh filters.
5. Reinstall the L-shaped arm fitting in the washing machine.
6. Make sure the connections are watertight and turn on the tap.
A
F400E_WF70F5E_NonBubble-03262C-01_EN.indd 34 2013-01-18 �� 1:54:33