Filter
Top Products
42_ washing a load of laundry
7. Once the Start/Pause button is pressed the “PS” will start to blink.
Once it starts blinking the phone will automatically start to connect.
Figure 8
8. After the “PS” is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [
] starts blinking. If the Smart Control enabled icon
starts blinking, press and hold the Signal on/o button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [
] is turned on.
Figure 9
9. Press the washer name tab to connect to the washer.
Figure 10
washing a load of laundry
WF455AG-03159A-04_EN.indd Sec5:42WF455AG-03159A-04_EN.indd Sec5:42 2012-11-28 2:07:342012-11-28 2:07:34