Filter
Top Products
washing a load of laundry _39
STEP 12
When the network is setup the unit will display
“Transfer complete”. After the transfer is
completed select “Confi rm”. The unit will then
display “oAP”. The phone is now connected to
the machine through the network.
STEP 13
After the phone is connected
to the machine, press
the Temp & Start/Pause
buttons simultaneously for
3 seconds. After 3 seconds
the original wash cycle will
be displayed on the LED
screen.
STEP 14
After the wash cycle
has been displayed wait
approximately 1 minute. You
will then see the Wi-Fi icon
start to blink.
STEP 15
Once the Wi-Fi icon is
displayed press and hold the
“Signal” for 3 seconds. The
Wi-Fi icon will stop blinking.
The machine is now ready to
run the device certifi cation.
03 washing a load of laundry
WF455AG-03159A-04_EN.indd Sec5:39WF455AG-03159A-04_EN.indd Sec5:39 2012-11-28 2:07:332012-11-28 2:07:33