Filter
Top Products
68_ troubleshooting
ERROR CODE MEANING & SOLUTION
tE
A temperature sensor problem.
Restart the cycle. If the code reappears, call customer service.
3E
A motor problem.
Restart the cycle. If the code reappears, call customer service.
2E
High/Low voltage detected.
Restart the cycle. If the code reappears, call customer service.
AE
A Communication error between the SUB(Sensor) PBA and the MAIN PBA
Call customer service.
AE4
A Communication error between the WIFI PBA and the MAIN PBA
Call customer service.
AE3
A Communication error between the DR Module and the MAIN PBA
Call customer service.
AE5
A Communication error between the LCD PBA and the MAIN PBA
Call customer service.
8E
A MEMS sensor problem.
Call customer service.
SF1
SF2
SF3
A system error
Call customer service.
SUdS
Too many suds are detected during the wash session. The unit is put on hold until
the amount of suds have been reduced. The unit will then go back to operating.
When it fi nishes washing, the “End” and “SUdS” codes will blink in turn.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
troubleshooting
WF455AG-03159A-03_EN.indd Sec7:68WF455AG-03159A-03_EN.indd Sec7:68 2012-08-31 12:32:072012-08-31 12:32:07