Filter
Top Products
14_ Washing a load of laundry
Child lock
A function that prevents children from playing with your washer.
Once the Child Lock function is activated, the control panel cannot be activated, preventing
children from playing with the washer.
ACTIVATING/DEACTIVATING
If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal
buttons at the same time for 3 seconds.
How It works:
1. To activate or deactivate the Child Lock function, press and hold both the Soil level and
Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available
when the power is on.
2. When the Child Lock function is activated, and any button except for the Power button is
pressed, the buzzer will sound for a short period and the “Child Lock” indicator will turn off
for 10 seconds.
3. The Child Lock function stays on even after the power has been turned on and off or the
power cord has been disconnected and reconnected.
When buttons, other than the Power button, do not respond, please check if the Child
Lock function is on.
Garment+
You can add or take out laundry items even after the wash has started, as long as the
“Garment+” light is on. Pushing the Start/Pause button unlocks the door, unless the water is
too hot or if there is too much water in your Washer. If you are able to unlock the door and wish
to continue the wash cycle, close the door and press the
Start/Pause button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode.
The “My Cycle” light will indicate activation.
You can select all options as follows in
“My Cycle” mode.
1. Select cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
See page 25 for available option settings with each cycle.
3. Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.
The cycle and options you select will be displayed the next time you choose “My Cycle”
.
You can change the
“My Cycle” settings by repeating the same process above.
The last used setting will be displayed the next time you choose “My Cycle”.
washing a load of laundry
WF337A-02440C-03_EN.indd 14 2009-05-13 ¿ÀÈÄ 5:31:10