Filter
Top Products
5-3
Part Name
Descriptive Picture
How To Do
Ag PCB
1. Unplug the unit.
2. Remove Top Cover.
3. Flip open the PCB cover.
4. Disconnect the wire harness.
5. Remove screws (2ea) on the frame.
EMI Filter
1. Unplug the unit.
2. Remove Top Cover.
3. Remove the earth screw.
3. Remove the acorn nut (13mm) and
disconnect the wire harness.
Water Valve
1. Unplug the unit.
2. Remove Top Cover.
3. Remove two screws for each Single Hot
and 3-Combo Cold Valve.
4. Remove clamps and hoses.
Dispenser
1. Unplug the unit.
2. Remove Top Cover.
3. Remove Dispenser Drawer.
4. Remove screws(3ea) on the top.
5. Plug out all the connectors.
6. Unscrew(6ea) PCB and separate it from
Console.
5-2. DISASSEMBLY