Filter
Top Products
7
Use
• Only operate the steamer on
the floor
clear of any materials which may obstruct
the base of the steamer (flat and horizontal
surface). Do not obstruct the orifices on the
lower part of the appliance.
• Depending on the model the steam
amount can be set to the desired level with
the variable steam control.*
• If necessary, expand the poles to the
desired height by unlocking them. Gently
pull the hanger with the hand and lock the
poles to the desired height with the other
hand. Take care not to jam the double
poles by pulling them asymetrically.
• Plug in the power cord and turn on the
power using the foot operated pedal. The
power light will illuminate. The steamer is
operating.
• The unit will produce steam in 60 seconds.
• Put garment onto the hanger head. Grasp
the steam head with the steam vents
pointing away from you. Start steaming by
touching material lightly with steaming
head and moving in an up/down vertical
motion. Beginning at the top of the
garment move in a downward direction.
Always steam in a vertical position.
• During use, the hose may make a gurgling
noise. This is normal and caused by
condensation. If you hear the gurgling
noise, hold the hose up to direct the
condensation back into the appliance.
Warning: Never steam a garment while it
is being worn. The hose and steam head
may become hot during use.
This is perfectly normal. Be careful and
avoid any prolonged contact.
Warning: Do not allow the steamer to
run dry.
Warning: Never use the steamer more
than 3 hours.
*Depending on the model: these accessories are specific to certain models or available as an option.