Filter
Top Products
2
4 5
Assembly :
Preparation:
• Place the base on the floor and remove
the water tank.
Install pole in main unit:
• Insert pole 1 and 2 according to the
diagram to the right, ensuring the marks
on the unit and the poles line up.
• Press pole firmly into place.
Locking the pole :
• With the poles inserted lay the base on
its side.
• Turn the 2 lockbars on the base of the
steamer 90° to secure the poles.
• Use a coin or similar object to turn the
lockbar.
• After the poles are locked, pick up the
unit and return to its use position.
Installing Integrated Hanger :
• Take the hanger with the brush hooks
facing to the front.
• Check for correct orientation with the
index marks matching.
• Insert both ends of the hanger into the
pole connection and press both ends
simultaneously into the pole until the
hanger properly engages.
• If it is required to dismantle the pole from
the main unit, tilt the appliance and
unlock the pole first.
• Then place the appliance back into it’s
upright position. Expand both poles to
the desired height by unlocking them.
Pulling them gently and locking them.
WARNING : unlock the four clips while
keeping integrated hanger in your hand.
• Dismantling of the hanger from the poles
by the customer is not foreseen.
Attaching Steam hose to main unit :
1) Insert hose plug into hose connector on
main unit.
2) Fix hose connector by pulling clamping
ring upwards.
P
ole 1
Pole 2
1