Philips HI515 Iron User Manual


 
General description (fig. 1)
A Spray nozzle
B Filling opening with cap
C Turbo-steam button 0 (HI545/35/29/28/25)
D Shot-of-steam button 9
E Steam control
- 0 = no steam
- 1 = minimum steam output
- 6 = maximum steam output
F Spray button 8
G Auto-stop light
H Temperature light
I Temperature dial
J Soft-touch handgrip (HI545/35/29/28/25)
K Cord storage
L Type plate
M Water window
N Self-clean button
O Filling cup
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
If the appliance is provided with an earthed plug, it must be
plugged into an earthed wall socket.
Do not use the appliance if the plug, the cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or is leaking.
Check the cord regularly for possible damage.
If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
Never leave the appliance unattended when it is connected to the
mains.
Never immerse the iron and the stand, if provided, in water.
Keep the appliance out of the reach of children.
Young children should be supervised to ensure that they do not
play with the appliance.
This appliance is not intended for use by young children or infirm
persons without supervision.
The soleplate of the iron can become extremely hot and may
cause burns if touched.
Do not allow the cord to come into contact with the soleplate
when it is hot.
When you have finished ironing, when you clean the appliance,
when you fill or empty the water tank and also when you leave
ENGLISH6