Important
Read these instructions for use carefully and look at the illustrations
before you start using the appliance.
Save these instructions for use for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Never leave the iron unattended when it is connected to the mains.
◗ This appliance is not intended for use by young children or infirm
persons without supervision.
◗ Young children should be supervised to ensure that they do not
play with the appliance.
◗ The soleplate of the iron can become extremely hot and may
cause burns if touched. Do not allow the cord to come into
contact with the soleplate when it is hot.
◗ When you have finished ironing, when you clean the appliance,
when you fill or empty the water tank and also when you leave the
iron even for a short while: set the steam control to position O,
put the iron on its heel and remove the mains plug from the wall
socket.
◗ If the mains cord of this appliance is damaged,it must always be
replaced by Philips or a service centre authorised by Philips in
order to avoid hazardous situations.
◗ Never use the appliance if it is damaged in any way.
◗ This appliance is intended for household use only.
General description (fig. 1)
A Temperature control dial
B Steam control dial
O = no steam
Á = minimum steam
q = moderate steam (types GC2225,GC2220, GC2215, GC2130,
GC2125, GC2120 only)
w = maximum steam
x = Calc-Clean function
C Spray button 8
D Spray nozzle
E Temperature indicator
F Filling cap
G Water filling opening
H Water tank
I Type plate
J Cord
K Extra Steam function (press steam control dial) (type GC2105)
L Temperature pilot light/Auto-off pilot light (types GC2225, GC2130
only)
M Shot of steam button 9 (types GC2225,GC2220, GC2215,
GC2130, GC2125, GC2120,GC2115, GC2110 only)
ENGLISH6