Filter
Top Products
ÊDanger From an Operating Press
CRUSH HAZARD—Devices in and above the press move without warning
and can entangle, crush, or sever limbs on contact.
☞ NEVER touch or reach into assemblies in or above press frame unless
power is locked OFF and tagged out, and then only for maintenance.
☞ ALWAYS ensure all personnel are clear of the press and the receiving conveyor
and all press side doors are closed and guards are in place before returning
power to either machine.
☞ DO NOT climb on press unless press power is locked OFF and tagged out.
ÊDanger From Moving Conveyor
FALL HAZARD—The receiving conveyor starts without warning. Stand-
ing or walking on the conveyor may cause you to fall or be entangled in
or struck by moving system devices.
☞ Lock OFF and tag out power at wall disconnect before servicing the receiving
conveyor or press.
☞ DO NOT stand or walk on the receiving conveyor or belt at the press discharge
end when performing service or maintenance.
☞ ALWAYS ensure all personnel are clear of press and receiving conveyor before
returning power to either machine.
7