Panasonic NH-P70G2 Clothes Dryer User Manual


 
Installation Instructions - 25
Choosing the Right Location
Installing the set-in
appliance
- You need a space at least 60 cm wide.
At least 2 mm of clearance on the
sides, and 3 mm of clearance above
and behind the appliance are required
(in case you do not use the extended
water-drain hose).
- The counter above the appliance
must be firmly fixed to the adjoining
cupboards.
- You need to have the plug accessible
after installation.
Metal cover
Metal cover (AXW4595-7SR0)
Caution
Instead of the standard cover panel,
have a technician install a metal
cover.
Warning
The appliance must not be installed
behind a lockable door, a sliding
door or a door with a hinge on
the opposite side to that of the
appliance, in such a way that a full
opening of the appliance door is
restricted.
This will prevent children from being
locked in the drum.
Caution
- Do NOT install the appliance in
direct sunlight, or in a place where
temperatures reach freezing or are
excessively high.
- The cool air intake panel on the
front of the appliance must not be
blocked or covered, for example,
by a laundry basket, as this might
cause a malfunction
NH-P70G2_AUS_NZ.indb 25 2013/07/04 11:44:14