Oliso Touch & Glide Iron User Manual


 
1 ) Use iron only for its intended use.
2 ) To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
3 ) The iron should always be turned to “Off” before plugging or unplugging from the outlet. Never yank
cord to disconnect from the outlet; instead, grasp plug and pull to disconnect.
4 ) Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely
around iron when storing.
5 ) Always disconnect iron from electrical outlet when lling with water or emptying and when not in use.
6 ) Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk
of electric shock, do not disassemble the iron, take it to a qualied serviceman for examination and
repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
7 ) Do not allow children to use iron. Close supervision is necessary for any appliance being used near
children. Do not leave iron unattended while connected or on an ironing board.
8 ) Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam
iron upside down – there may be hot water in the reservoir.
9 ) If the malfunction indicator goes on, the atiron is not operating normally. Disconnect from the power
supply and have the atiron serviced by qualied service personnel.
10 ) When using vertical steam function, do not point the iron towards yourself or anybody else.
SAVE THESE INSTRUCTIONS
When using your atiron, basic safety precautions should always be followed, including the following:
Read all instructions before using this product.
1 ) This is a 1440 watt appliance. To avoid a circuit overload, do not operate another high wattage
appliance on the same circuit.
2 ) If an extension cord is absolutely necessary, a 12 ampere cord should be used. Cords rated for less
amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or
tripped over.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SPECIAL INSTRUCTIONS