Nokia 610 Washer User Manual


 
Settings
Copyright © 2004 Nokia. All rights reserved. 41
Network selection
The cellular network to which your car kit phone is to be
connected can be selected either manually or automatically.
p Automatic
Your car kit phone will automatically select a suitable
available cellular network in the area.
p Manual
You can view a list of available cellular networks and select
any network that has a roaming agreement with your home
network operator. The car kit phone stays in manual mode
until the automatic mode is selected or another SIM card is
inserted into the phone.
To select the desired cellular network, with the display in
standby:
a Select the Settings menu and press to open it.
a Scroll with to the Phone settings item and press
to select it.
a Scroll with to Network selection and press to
select this option.
a Scroll with to the desired network and press to
select it.
a Follow the instructions shown on the display.
Power down timer
Your car kit phone comes with a power down delay that keeps
your phone in service for the period of time set even when the
car’s ignition has been switched off. After you have switched off
the ignition, the car kit phone remains in operation for the time
set in the Power down timer. If you are engaged in an active call
when the ignition is switched off, the power down timer will
not begin the countdown until the active call has ended.
y
The original factory setting for the power down timer is zero
minutes. The power down delay is limited to a maximum
delay time of 24 hours.
x
Remember that your car kit phone runs off the car battery.
When setting the power down timer, take care not to drain
your car battery.
To set the power down timer, with the display in standby:
a Select the Settings menu and press to open it.
a Scroll with to the Phone settings item and press
to select it.
a Scroll with to Power down timer and press to
select this option.
a Scroll with to set the time as desired.
a Press to activate the timer.
A message on the display will notify you that the power down
timer has been set.