Filter
Top Products
Basic components of the CUW-3 input device
18 Copyright © 2004 Nokia. All rights reserved.
Navi wheel
Turn the Navi wheel to adjust the volume of the ringing
tone of an incoming call or the loudspeaker volume
during an ongoing call. You can also use the Navi wheel
to scroll within a menu.
In the standby display, turn the N
avi
wheel to the left
to activate input of a phone number. If you are in the
voice display, turning the Navi wheel to the left will scroll
through the voice commands and allow you, for example,
to select one to be replayed.
In the standby display, turn the N
avi
wheel to the right
to search for a contact entry in alphabetical order. If you
are in the voice display, turning the Navi wheel to the
right will scroll through the voice tags you have trained
for voice dialling a number and allow you, for example, to
select one to be replayed
.
Press the Navi wheel
to access a function in a particular context:
– to start the menu and select an item.
– to select an item from a list.
– to start options and select an item.
This key activates the following functions from the standby
display:
a Press to switch off the ringing tone.
An incoming call is indicated by a flashing display.
a Press and hold to put the car kit phone in off mode. Press
again to return to the standby display.
a Press to switch incoming or ongoing calls from your car kit
phone over to a compatible, paired headset and back as
desired.
x
To restart the car kit phone, press and hold for longer
than 10 seconds.
This key activates the following voice functions from the
standby display:
a Press to activate voice dialling and voice commands.
a Press and hold to activate recording (also during ongoing
calls).
Press
– to end a call.
– to delete a character or number entered.
– to return to the previous menu item or display.