Filter
Top Products
www.morphyrichards.com
6
FEATURES OF
YOUR STEAM
GENERATOR
Temperature
indicator light
The indicator light shows
that the iron is warming up.
When the required
temperature is reached, the
light will go out and will
cycle on-off during
operation.
Steam function
During the steaming
process, small amounts of
water may be ejected from
the soleplate. This is normal
and can be avoided by
using the steam for short
amounts of time and only
when the iron is at the
correct temperature (the
indicator light on the iron
goes out when ready).
Sudden jolts of the boiler
unit can also cause water
droplets on the soleplate;
therefore, do not move the
base unit during ironing. We
recommend for the first
time ironing that you iron
over an old towel.
Vertical steam
Hold the iron in a vertical
position between 1cm and
2cm away from the item I .
Press the steam trigger ⁄,
this will create vertical
steam.
This feature is especially
useful for removing creases
from hanging clothes,
curtains, wall hangings, etc.
EMPTYING AND
STORING
When you have finished
ironing, unplug your steam
generator.
1 Slide out the water tank
and remove the anti-scale
filter J.
2 Empty the water in the tank
by holding it upside down
K.
3 Replace the anti-scale filter
and reinstall the water tank.
Unplug the generator and
leave the iron to cool off for
15 minutes minimum. The
iron must be placed on the
iron rest plate.
The iron and boiler can now
be stored together.
MAINTENANCE
To clean a
stainless steel
soleplate
To keep the soleplate of
your iron clean and free of
limescale, we recommend
that you use one of the
gentle chrome, silver or
stainless steel cleaners that
are generally available.
Always follow the
manufacturer’s instructions.
To clean off melted
man-made fibres, set the
iron at 3-dot position and
pass it over a clean piece
of cotton which will draw
the deposit off the surface.
To clean a ceramic
coated soleplate
(certain models only)
In the unlikely event of any
man-made fibre fusing to
the soleplate, set the iron at
the MAX position and pass
it over a clean piece of
cotton which will draw the
deposit off the surface.
Do not use scouring
powder or solution as this
could cause damage to the
coating.
IMPORTANT: Do not
descale the soleplate with
descaling products,
proprietary cleaning
agents or vinegar when
flushing out the soleplate.
To clean the
exterior
Allow the steam generator
to cool and wipe over with
a damp cloth and mild
detergent, then wipe with a
dry cloth.
UK Helpline 0844 871 0960 Replacement Parts 0844 873 0726 Ireland Helpline 1800 409 119
I
J
K
RN42271MUK Rev8_Instruction Book 23/04/2013 13:42 Page 6