Filter
Top Products
3 Connect the appliance to a
suitable mains outlet, and
switch on the socket. Turn
the power switch ‚ on the
base unit to ‘I’ (on) and the
indicator will glow.
4 The boiler ready indicator
light „ situated above the
‘power switch’ ‚ will also
illuminate, indicating the
boiler is on its heating cycle
and will go out when the
required temperature is
reached.
5 Turn the temperature dial
on the iron in a clockwise
direction, select dot-2 or
dot-3 according to the
recommendation of the
garment label.
6 The iron’s temperature
indicator light › goes off
when the required
temperature is reached.
7 Depress the steam button
⁄ for 1 minute to clean the
steam generating system
(for first time use). It will be
accompanied by a clicking
noise which is quite normal.
8 Begin first time ironing with
an old towel. It takes about
1 minute to reach the
required temperature.
9 Press the steam button ⁄
for steam ironing.
10 To switch the unit off, turn
the power switch on the
base unit to ‘O’ (OFF).
The spray unit
(certain models only)
The spray unit can be used
at any time and does not
affect any product settings.
Filling the spray
unit
The spray feature ‰ is
lightly secured to the
handle. To fill the water
tank, pull the spray unit
forward using the two
moulded lugs provided.
Remove the spray bottle Â
from the base of the pump
and fill with water to the
‘MAX’ mark.
Re-fit the spray bottle,
making sure the arrows
(printed black) are in line.
To replace the
spray unit
Align the spray unit with the
front of the iron.
Fit the bottom location leg
into the slot at the front of
the handle. Pivot the spray
unit towards the iron,
making sure it clips firmly in
place.
ANTI-SCALE
SYSTEM
The anti-scale filter is
designed to reduce the
build-up of limescale which
occurs during steam
ironing. This will prolong
the working life of your iron.
However, please note that
the anti-scale filter will not
completely stop the natural
process of limescale build-
up.
Replacing
anti-scale filter
How often you need to
replace the anti-scale filter
depends on how often you
use your iron with its steam
functions and how ‘hard’
your water supply is. Water
hardness varies greatly
from one area to another.
For advice on the relative
hardness of your water,
contact your local water
supplier.
If you iron more or less
frequently, then you should
alter the interval between
refills accordingly.
Replacement
anti-scale filters
To obtain replacement
anti-scale refills, telephone
our spares number on:
0844 873 0726.
• If a new filter is not
available, you may continue
operating the appliance but
scale will build up in the
system. Replace the used
filter as soon as possible.
1 Disconnect the appliance
from the mains outlet.
2 Slide out the tank and
remove the antiscale filter
E.
3 Pull the plate from the end
of the filter F.
4 Remove the foam pad G
and slide out the spent
antiscale sleeve H.
5 Place the refill into the filter,
reposition the foam pad
and clip the plate onto the
filter, making sure it locks in
position H.
5
UK
Helpline 0870 060 2614 Replacement Parts 0870 157 6645 Ireland Helpline 1800 409119
For details of other Morphy Richards products, please see our website:
E
F
G
H
RN42271MUK Rev8_Instruction Book 23/04/2013 13:42 Page 5