Miele wt945 Washer/Dryer User Manual


 
Final residual moisture after
drying
The machine is set to give the best
drying results. You do, however, have
the option of shortening or
lengthening the drying time if you
prefer.
Shortening the drying time:
by
:
1 minute
2 minutes
3 minutes
4 minutes
the display will
show:
I
2
3
4
Lengthening the drying time:
by
:
1 minute
2 minutes
3 minutes
4 minutes
the display will
show:
5
6
7
8
Factory setting:
0
Follow steps A to G to programme and
store in memory.
The programmable functions are
activated with the help of the additional
option buttons and the WASHING
programme selector.
Before you begin, first ensure that
:
the machine is switched off.
the drum door is closed.
the WASHING and DRYING
programme selectors are at the
Finish
position.
APress the additional option buttons
Soak
and Pre-wash at the same time,
hold pressed in and . .
B. . . switch the machine on with the
I-ON / 0-OFF
button.
CThen release these buttons.
The
Soak/Pre-wash
and
Washing
sequence indicator lamps will flash.
A P will appear in the left of the
display.
DTurn the WASHING programme
selector to MINIMUM IRON 30°C .
EA number between 0 and 8 will
appear in the display.
By pressing the START button
repeatedly you can:
shorten
the drying time in 1 minute steps:
I, 2, 3 or 4 will appear in the display;
increase
the drying time in 1 minute steps, 5,
6, 7 or 8 will appear in the display;
or accept the factory setting
(0 will appear in the display).
FSwitch the machine off with the
I-ON
/ 0-OFF
button.
The setting you have selected is now
stored in memory.
GTurn the WASHING programme
selector to the
Finish
position.
Programmable functions
74