Filter
Top Products
G Select Delay start
If required please refer to "Delay start"
for more information.
H Start the programme
^
Press the flashing Start/Stop button.
The estimated programme duration will
start counting down in one minute
steps. During the first few minutes the
machine measures how much water is
being absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The washer-dryer
shows you when each section of the
programme is reached.
The drum lighting switches off once the
programme has started.
I Remove the laundry when the
programme has finished
The anti-crease phase starts as soon as
the programme finishes.
The machine will switch off
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the K button to switch
it back on again.
^
Turn the programme selector to the
Stop position.
^
Open the drum door and remove the
laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
Important: Always remove the
laundry before switching the machine
off. This is important to ensure that
the load size indicator works
correctly.
^
Switch the machine off using the
K button.
See "After each washing or drying
programme" in "WASHING AND
DRYING" for further information.
After washing a full load
If you have washed a full load of
laundry and you wish to dry the
laundry in the washer-dryer
afterwards you will have to remove
half the load. Carry out the drying
procedure in two batches.
WASHING
23